Shows fabbed water return line from the radiator behind the shifter,
Date: 07/01/2008
Views: 689
|
Air forks & an SW Ultra-Shift tach.
Date: 07/01/2008
Views: 706
|
Steering damper & dead-mans switch.
Date: 07/01/2008
Views: 706
|
Gauge on top of the engine is for fuel pressure.
Date: 07/01/2008
Views: 689
|
Here is how I formed the clearance for the engine in the side of the covers.
Date: 07/20/2008
Views: 725
|
I made a pattern out of wood and clamped the part to it. I used a propane torch to anneal the aluminum to make it soft.
Date: 07/20/2008
Views: 739
|
Then I made a poor-man's English Wheel. I made a bracket on the end of a pipe with a flange to put my foot on.
Date: 07/20/2008
Views: 728
|
I rolled the wheel, annealed, rolled, annealed etc until I formed it deep enough.
Date: 07/20/2008
Views: 717
|
The part curled up a bit.......
Date: 07/20/2008
Views: 720
|