|
I made a fixture to cut all the tubes the same.
Date: 06/01/2004
Views: 672
|
All eight are within an 1/8" of an inch.
Date: 06/01/2004
Views: 648
|
These are the pieces that will attach to the exhaust flange & mate up to the tubes.The angle on the short tubes match the an
Date: 06/01/2004
Views: 661
|
|
Small tubes tack-welded to the flanges and the rings.
Date: 06/01/2004
Views: 645
|
Large tubes sitting on the small tubes. There are two rods tack-welded to the bottom of the large tubes to keep the parallel
Date: 06/01/2004
Views: 652
|
All welded up.
Date: 06/01/2004
Views: 624
|
|
The small holes on the inside of the tubes are for baffles to keep the cops at bay.
Date: 06/01/2004
Views: 695
|
Painted with VHT flat white, thanks Skillet.
Date: 06/01/2004
Views: 639
|
Mounted & ready to go. I'll wrap them in white thermo-tec to keep the heat away from the motor.
Date: 06/01/2004
Views: 667
|
