Login
Gallery TatMatt's '25 Ford Model T Exhaust

Exhaust

Date: 06/02/2004
Size: 12 items
nextlast
I made a fixture to cut all the tubes the same.

I made a fixture to cut all the tubes the same.

Date: 06/01/2004
Views: 639
All eight are within an 1/8" of an inch.

All eight are within an 1/8" of an inch.

Date: 06/01/2004
Views: 620
These are the pieces that will attach to the exhaust flange & mate up to the tubes.The angle on the short tubes match the an

These are the pieces that will attach to the exhaust flange & mate up to the tubes.The angle on the short tubes match the an

Date: 06/01/2004
Views: 636
Small tubes tack-welded to the flanges and the rings.

Small tubes tack-welded to the flanges and the rings.

Date: 06/01/2004
Views: 615
Large tubes sitting on the small tubes. There are two rods tack-welded to the bottom of the large tubes to keep the parallel

Large tubes sitting on the small tubes. There are two rods tack-welded to the bottom of the large tubes to keep the parallel

Date: 06/01/2004
Views: 625
All welded up.

All welded up.

Date: 06/01/2004
Views: 599
The small holes on the inside of the tubes are for baffles to keep the cops at bay.

The small holes on the inside of the tubes are for baffles to keep the cops at bay.

Date: 06/01/2004
Views: 667
Painted with VHT flat white, thanks Skillet.

Painted with VHT flat white, thanks Skillet.

Date: 06/01/2004
Views: 613
Mounted & ready to go. I'll wrap them in white thermo-tec to keep the heat away from the motor.

Mounted & ready to go. I'll wrap them in white thermo-tec to keep the heat away from the motor.

Date: 06/01/2004
Views: 640
nextlast
Page: 1 2
Powered by Gallery v2.3